3D Products: The Next Generation of Polishes and Compounds

3D Car Care Products is a US-based manufacturer of polishes and compounds based on innovative aluminum oxide compounds. 3D Car Care was founded over 30 years ago and produces not only paint polishes but also cleaners, ceramic coatings, polishing pads, and abrasives. All chemical products are produced in their own facility in California. 3D Car Care also operates its own plant for the production of raw materials for abrasives. Since September 2021, the world's probably most famous detailer and detailing trainer, Mike Philipps, has been a permanent employee at 3D. 3D Car Care has been exclusively distributed in Germany and Austria by Krüger GmbH since September 2021. Krüger GmbH is also the parent company of the car care and detailing provider Chemical-Shark.de.

Variants!

3D AAT 501 Cutting Polish 236ml

3D Products

3D AAT 501 Cutting Polish 236ml

3D AAT 501 is an affordable cutting polish designed for maximum material removal. Specifically developed for automotive paint shops, it’s part of the AAT series, highly regarded in detailing and high-quality paint preparations for its efficiency and performance, comparable to European products but more powerful. 3D AAT 501 delivers strong cutting power, doesn't wear down polishing pads, and produces minimal dust. The ACA 501 Heavy Cut Polish effectively removes scratches starting from P1000 grit. High Cutting Power at an Affordable Price with 3D AAT 501 3D AAT 501 can be used with both orbital and rotary polishers, leaving a very glossy finish without dulling, which is uncommon for heavy cuts. Ideally, it should be followed by a finishing polish such as 3D AAT 502, 3D One Hybrid, or a comparable product. 3D AAT 501 becomes clear quickly during application, allowing for good visibility on the paint surface. It is characterized by a long working time and is economical due to the late breakdown of polishing particles. Very Easy Application: 3D AAT 501 3D AAT 501 is solvent-free, silicone-free, kerosene-free, and free of fillers. Despite its eco-friendly and user-safe formulation, it produces no dust and wipes off easily. We recommend using microfiber pads, wool pads, and medium to hard foam pads for optimal results. Thanks to its high viscosity, 3D AAT 501 doesn't splatter even at high RPMs. 3D AAT 501 provides comparatively less cut than ACA X-TRA 510 and ACA X-TRA 500 polishes but is budget-friendly and still more efficient than most premium polishes from other manufacturers.

Content: 0.236 Liter (€50.42* / 1 Liter)

€11.90*

Variants!

3D AAT 501 Paint Polish Cutting 946ml

3D Products

3D AAT 501 Paint Polish Cutting 946ml

The 3D AAT 501 is an affordable paint polish designed for maximum material removal. Created specifically for the needs of paint shops, this product is marked by the manufacturer as part of the AAT series. However, the AAT series is gaining popularity in detailing and high-quality paint preparations due to its excellent results, comparable to European products in terms of application but achieving higher performance. 3D AAT 501 offers a strong cut, does not damage polishing pads, and is dust-free. The ACA 501 Heavy Cut Polish removes scratches from grain 1000. High Material Removal at an Affordable Price with 3D AAT 501 3D AAT 501 paint polish can be used both eccentrically and rotatively, leaving a remarkably glossy finish for a heavy cut polish without matting. Ideally, 3D AAT 501 is used before a finishing polish like the 3D AAT 502, 3D One Hybrid, or a comparable polish. After a short processing time, 3D AAT 501 becomes clear, allowing for good visibility on the paint. It features a very long processing time and is cost-effective due to the late breakdown of the polishing bodies into small particles. Very Easy Application: 3D AAT 501 3D AAT 501 is free of solvents, silicone, kerosene, and fillers. Despite its environmentally friendly formulation, 3D AAT 501 does not produce dust and can be easily wiped off. We recommend using microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D AAT 501 does not splatter even at high RPMs. In terms of time, 3D AAT 501 delivers less material removal than the ACA X-TRA 510 and ACA X-TRA 500 polishes. It is affordable yet more powerful than most premium polishes from other manufacturers.

Content: 0.946 Liter (€34.36* / 1 Liter)

€32.50*

Details

Variants!

3D AAT 502 Finish Polish Fine 236ml

3D Products

3D AAT 502 Finish Polish Fine 236ml

3D AAT 502 is an affordable polish designed for a high-gloss finish. This polish has been specifically developed for the needs of body shops, as indicated by the manufacturer's AAT series. However, the AAT series is increasingly gaining traction in detailing and high-quality paint preparations, as it delivers great results and is similar to European products in terms of handling, yet more efficient. 3D AAT 502 produces a high-gloss finish, doesn't clog polishing pads, and is dust-free. The AAT 502 Fine Polish is intended for use after heavy-cut polishes and follows after 3D AAT 501, 3D ACA 500/510, or a comparable heavy-cut polish. Easily Removes Haze and Holograms 3D AAT 502 can be used both with a rotary and dual-action polisher, effortlessly removing haze, holograms, pigtails, and fine scratches. Ideally, 3D AAT 502 is used after a sanding compound. It gives clarity quickly, allowing for a good view of the paint. 3D AAT 502 features a very long working time, is economical, and cost-effective. Very Easy Application: 3D AAT 502 3D AAT 502 is solvent-free, silicone-free, kerosene-free, and free from fillers. Despite its environmentally and user-friendly formula, 3D AAT 502 is dust-free and easy to wipe off. We recommend using foam, wool, or microfiber finish pads for application. The 3D AAT 502 provides slightly less material removal compared to ACA X-TRA 520 and has a marginally higher consumption.

Content: 0.236 Liter (€50.42* / 1 Liter)

€11.90*

Details

Variants!

3D AAT 502 Paint Polish Finish Fine 946ml

3D Products

3D AAT 502 Paint Polish Finish Fine 946ml

3D AAT 502 is an affordable paint polish designed for a high-gloss finish. Specifically developed for the needs of painting businesses, this polish is recognized as part of the AAT series. However, the AAT series is gaining popularity in detailing and high-quality paint preparations, as it delivers excellent results and is comparable to European products in terms of application, but is more efficient. 3D AAT 502 produces a high-gloss finish, is gentle on polishing pads, and does not produce dust. The AAT 502 Fine Polish is designed for use after heavy cut polishes, coming after the 3D AAT 501, 3D ACA 500/510, or a similar heavy cut polish. Easily Removes Haze and Holograms 3D AAT 502 paint polish can be used both eccentrically and rotationally, effortlessly removing haze (gray veil), holograms, pigtails, and fine scratches. Ideally, 3D AAT 502 is applied after a sanding paste. It achieves a clear finish in a short processing time, allowing for good visibility on the paint surface. 3D AAT 502 features a very long working time and is economical and affordable to use. Very Easy Application: 3D AAT 502 3D AAT 502 is free of solvents, silicones, kerosene, and fillers. Despite its environmentally and user-friendly formulation, 3D AAT 502 does not dust and can be easily wiped off. We recommend using it with finish pads made of foam, wool, or microfiber. The 3D AAT 502 delivers slightly less material removal compared to the ACA X-TRA 520 and has a marginally higher consumption rate.

Content: 0.946 Liter (€34.36* / 1 Liter)

€32.50*

Variants!

3D AAT 505 All in One Paint Polish with Sealant 236ml

3D Products

3D AAT 505 All in One Paint Polish with Sealant 236ml

3D AAT 505 is a highly effective All in One polish with a very high cutting power. This polish was specially developed for the needs of paint shops and auto detailers, as marked by the manufacturer with the AAT series. However, the AAT series is also increasingly favored in detailing and high-quality paint preparations due to its excellent results and its resemblance to European products in terms of application, but it is more powerful. 3D AAT 505 can be used as a One Step polish or following a heavy abrasive cutting compound. Achieve a Stunning Finish Faster with 3D AAT 505 3D AAT 505 contains montan wax, which is applied in a single step after the removal of scratches, weathering, or other paint defects, creating an immense gloss. However, AAT 505 is not just a covering polish. The product was developed as the best possible blend of defect removal and gloss enhancement. Water-Based and Body Shop Safe, as it is Silicone-Free Although AAT 505 is an All in One polish containing abrasive particles, chemical polish, and wax, the product is silicone-free and can be used in paint shops. With 3D AAT 505, all weathered paints can be corrected so that these areas are indistinguishable from freshly painted components. 3D AAT 505 is water-based and therefore poses no health risks, making it user-friendly. Difference Between 3D AAT 505 and 3D Speed All in One 3D Speed and 3D AAT 505 are both All in One polishes containing wax. However, the 3D AAT is formulated for sharper cutting and is better suited for freshly painted surfaces due to its complete absence of silicone.

Content: 0.236 Liter (€74.15* / 1 Liter)

€17.50*

Variants!

3D AAT 505 All in One Paint Polish with Sealant 59ml

3D Products

3D AAT 505 All in One Paint Polish with Sealant 59ml

3D AAT 505 is a highly effective All in One polish with very high cutting ability. The polish has been specifically developed for the needs of body shops and automotive detailers, which the manufacturer indicates with the AAT series. Nevertheless, the AAT series is also gaining traction in detailing and high-quality paint preparations because it delivers great results and is similar in application to European products, but more efficient. 3D AAT 505 can be used as a one-step polish or as a follow-up to a strongly abrasive grinding paste. Achieve Radiant Results Quickly: 3D AAT 505 3D AAT 505 contains Montan wax, which is applied in a single step after scratches, weathering, or other paint defects are removed, producing an enormous shine. However, AAT 505 is not a mere covering polish. The product has been developed as the best possible mix of defect removal and gloss. Water-Based and Body Shop Safe, as it is Silicone-Free Although AAT 505 is an All in One polish containing abrasive particles, chemical polish, and wax, the product is silicone-free and can thus be used in body shops. With 3D AAT 505, all weathered paints can be corrected to the point that they are indistinguishable from freshly painted components. 3D AAT 505 is water-based, making it safe for health and user-friendly. Distinction between 3D AAT 505 and 3D Speed All in One 3D Speed and 3D AAT 505 are both All in One polishes containing wax. However, the 3D AAT is formulated with a sharper cut and is better suited for freshly painted surfaces due to the complete absence of silicone.

Content: 0.059 Liter (€66.10* / 1 Liter)

€3.90*

Variants!

3D AAT 505 All in One Polish with Sealant 946ml

3D Products

3D AAT 505 All in One Polish with Sealant 946ml

3D AAT 505 is a highly effective All in One polish with a very high cutting power. This polish was specifically developed for the needs of paint shops and automotive detailing professionals, which the manufacturer signifies with the AAT series. However, the AAT series is also gaining popularity in detailing and high-quality paint corrections, as it delivers excellent results and is comparable to European products in terms of handling, but is more powerful. 3D AAT 505 can be used as a One Step polish or following a strong abrasive compound. Achieve stunning results quickly: 3D AAT 505 3D AAT 505 contains Montan wax, which is applied in a single work step after removing scratches, weathering, or other paint defects, creating an immense shine. However, AAT 505 is not a so-called covering polish. The product is developed as the best possible blend of defect removal and gloss. Water-based and Body Shop Safe, as it's silicone-free Although AAT 505 is an All in One polish containing cutting particles, chemical polish, and wax, the product is silicone-free, making it suitable for use in paint shops. With 3D AAT 505, all weathered paints can be corrected to match the appearance of freshly painted parts. 3D AAT 505 is water-based, making it safe for health and user-friendly. Distinction between 3D AAT 505 and 3D Speed All in One 3D Speed and 3D AAT 505 are both All in One polishes with a wax component. However, 3D AAT is formulated with sharper cutting power and is better suited for freshly painted surfaces due to the complete lack of silicone.

Content: 0.946 Liter (€72.41* / 1 Liter)

€68.50*

Variants!

3D ACA X-TRA 500 Cutting Polish 236ml

3D Products

3D ACA X-TRA 500 Cutting Polish 236ml

3D ACA X-TRA 500 is an innovative cutting polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be made in no time. The product contains advanced "Alpha Ceramic Alumina" polishing particles that allow for significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Cut and Gloss Level with 3D ACA X-TRA 500 3D 500 can be applied using rotary or eccentric machines, leaving a very glossy finish for a HeavyCut polish without hazing. Ideally, 3D 500 is used before a finishing polish such as 3D ACA X-TRA 520, 3D One Hybrid, or any comparable polish. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint surface. 3D 500 is characterized by a very long working time and is economical due to the late breaking down of the polishing particles into smaller particles. Easy to Use: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using microfiber pads, wool pads, and hard to medium-hard foam pads with 3D. Due to its high viscosity, 3D 500 does not splash even at high RPMs.

Content: 0.236 Liter (€74.15* / 1 Liter)

€17.50*

Variants!

3D ACA X-TRA 500 Cutting Polish 59ml

3D Products

3D ACA X-TRA 500 Cutting Polish 59ml

3D ACA X-TRA 500 is an innovative paint polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is produced by 3D Products in the USA. With 3D 500, paint defect corrections can be performed in a very short time. It contains cutting-edge "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. 3D 500 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. High Material Removal and Shine with 3D ACA X-TRA 500 3D 500 can be used both eccentrically and on a rotary polisher, leaving a very glossy finish typical for a HeavyCut polish without haze. Ideally, 3D 500 is used prior to a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a similar product. 3D ACA 500 becomes clear after a short working time, allowing a good view of the paint. It is characterized by an extended working time and is economical due to the very late breakdown of the polishing agents into small particles. Very Easy Application: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and devoid of fillers. Despite its environmentally friendly and user-friendly formulation, 3D 500 doesn't create dust and can be easily wiped off. It is recommended to apply 3D sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Due to its high viscosity, 3D 500 does not splatter even at high RPMs.

Content: 0.059 Liter (€66.10* / 1 Liter)

€3.90*

Variants!

3D ACA X-TRA 500 Paint Polish Cutting 946ml

3D Products

3D ACA X-TRA 500 Paint Polish Cutting 946ml

3D ACA X-TRA 500 is an innovative paint polish designed for HeavyCut and MediumCut applications. Known as 3D 500, this polish is manufactured by 3D Products in the USA. With 3D 500, paint defect corrections can be executed in a very short time. 3D 500 contains innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. It is suitable for both soft single-layer paints as well as hard clear coats. 3D 500 is free from fillers and can be completely removed even with mild paint degreasers. High Cut and High Gloss with 3D ACA X-TRA 500 3D 500 can be used both eccentrically and rotationally, leaving a very shiny finish typical of a HeavyCut polish without hazing. Ideally, 3D 500 should be used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable polish. 3D ACA 500 becomes clear after a short working time, allowing for good visibility on the paint. 3D 500 is characterized by a very long working time and is economically viable due to the late breakdown of the polishing agents into small particles. Very Easy Application: 3D ACA X-TRA 500 3D 500 is solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 500 does not produce dust, making it easy to wipe off. It should be used sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 500 does not splash even at high RPMs.

Content: 0.946 Liter (€68.60* / 1 Liter)

€64.90*

Variants!

3D ACA X-TRA 510 Paint Polish Cutting 236ml

3D Products

3D ACA X-TRA 510 Paint Polish Cutting 236ml

3D ACA X-TRA 510 is a cutting-edge paint polish designed for Heavy Cut applications. This polish can be used with both rotary and dual-action polishers. As known from other 3D polishes, it has an extended working time. It works faster than the 3D 500 on severe paint defects. 3D 510 contains innovative 'Alpha Ceramic Alumina' abrasive particles, allowing for a significantly longer processing time. It is suitable for both soft single-layer paints and hard clear coats. 3D 510 is free from fillers and can be completely removed even with gentle paint degreasers. High Material Removal in No Time with 3D ACA X-TRA 510 3D 510 can be used both excentrically and rotationally, leaving a gloss finish typical for Heavy Cut polishes without dulling. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or a comparable product. 3D ACA 510 becomes clear after a short processing time, allowing for good visibility on the paint. It features a very long working time and is economical due to the late breakdown of the abrasive particles into smaller fragments. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and filler-free. Despite its eco-friendly and user-friendly formulation, 3D 510 does not produce dust and can be easily wiped off. It is advisable to use 3D sparingly to avoid excess. We recommend using it with microfiber pads, wool pads, and hard to medium-soft foam pads. Thanks to its high viscosity, 3D 510 does not spray even at high RPMs.

Content: 0.236 Liter (€92.80* / 1 Liter)

€21.90*

Variants!

3D ACA X-TRA 510 Paint Polish Cutting 946ml

3D Products

3D ACA X-TRA 510 Paint Polish Cutting 946ml

3D ACA X-TRA 510 is a revolutionary paint polish designed for Heavy Cut applications. This polish can be used both with a dual-action and rotary polisher. As known from other 3D polishes, it can be worked for an extended period of time. It is faster than the 3D 500 when addressing significant paint defects. 3D 510 features innovative "Alpha Ceramic Alumina" polishing agents that allow for a significantly longer working time. 3D 510 is suitable for soft single-layer paints as well as hard clear coats. 3D 510 is free from fillers and can be completely removed even with mild paint cleaners. High Material Removal in Short Time with 3D ACA X-TRA 510 3D 510 can be employed with both dual-action and rotary machines, leaving a very glossy finish typical of a Heavy Cut polish without hazing. Ideally, 3D 510 is used before a finishing polish like the 3D ACA X-TRA 520, 3D One Hybrid, or similar. 3D ACA 510 becomes clear after a short working time, allowing good visibility on the paint. 3D 510 is characterized by a very long working time and is economical to use due to the delayed breakup of the polishing agents into smaller particles. Very Easy Application: 3D ACA X-TRA 510 3D 510 is solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 510 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid excess. We recommend using 3D with microfiber pads, wool pads, and hard to medium-soft foam pads. Due to its high viscosity, 3D 510 does not splash even at high RPMs.

Content: 0.946 Liter (€70.30* / 1 Liter)

€66.50*

Variants!

3D ACA X-TRA 520 Fine Paint Polish 946ml

3D Products

3D ACA X-TRA 520 Fine Paint Polish 946ml

3D ACA X-TRA 520 is an innovative fine paint polish designed for polishing and finishing purposes. Known by its short name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defects can be quickly polished to a high gloss after heavy-cut polishing passes. 3D 520 is water-based and contains "Alpha Ceramic Alumina" polishing ingredients, allowing for a significantly longer working time. It is suitable for both soft single-layer paints and hard clear coats. 3D 520 is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be used both eccentrically and rotationally, leaving a crystal clear, hologram-free finish. Ideally, 3D 520 should be applied after a heavy-cut or medium polish like the 3D ACA X-TRA 500 or a comparable product. 3D ACA 520 becomes clear after a short working time, allowing for excellent visibility on the paint surface. 3D 520 is characterized by a very long processing time, and the late breakup of the polishing bodies into small particles makes it easy to use and cost-effective. Very Simple Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its eco-friendly and user-friendly formulation, 3D 520 does not produce dust and can be easily wiped away. It's recommended to apply 3D sparingly to avoid any excess. We suggest using 3D with softer finishing foam pads.

Content: 0.946 Liter (€69.24* / 1 Liter)

€65.50*

Variants!

3D ACA X-TRA 520 Fine Polish Finish 236ml

3D Products

3D ACA X-TRA 520 Fine Polish Finish 236ml

3D ACA X-TRA 520 is a groundbreaking polish designed for fine polishing and finishing tasks. Known by the shorthand name 3D 520, this polish is manufactured by 3D Products in the USA. With 3D 520, paint defect corrections following heavy cut polishing can be quickly brought to a high gloss. This water-based formula contains "Alpha Ceramic Alumina" polishing agents which allow for significantly longer working times. 3D 520 is suitable for both soft single-layer paints and hard clear coats. It is free from fillers and can be completely removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be applied using both rotary and eccentric polishing methods, leaving behind a crystal clear finish that is free of holograms. Ideally, 3D 520 is used after a heavy cut or medium polish, such as the 3D ACA X-TRA 500 or a comparable polish. The polish achieves clarity quickly even after a short working time, allowing for great visibility on the paint. 3D 520 stands out due to its extended working time, as the late breakdown of polishing agents into small particles makes it user-friendly and cost-effective. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and is easy to wipe off. It is recommended to apply 3D 520 sparingly to avoid excess. We recommend using it with softer finishing foam pads.

Content: 0.236 Liter (€74.15* / 1 Liter)

€17.50*

3D ACA X-TRA 520 Fine Polish Sample! Free Product Sample! 59ml

3D Products

3D ACA X-TRA 520 Fine Polish Sample! Free Product Sample! 59ml

3D ACA X-TRA 520 is an innovative fine polish designed for polishing and finishing. Known as 3D 520, this product is manufactured by 3D Products in the USA. With 3D 520, paint imperfections can be polished to a high gloss in a very short time after HeavyCut polishing processes. 3D 520 is water-based and contains "Alpha Ceramic Alumina" polishing particles, allowing for a significantly longer working time. It is suitable for both soft single-layer paints and hard clear coats. 3D 520 is free of fillers and can be fully removed even with mild paint degreasers. Hologram-Free, Crystal Clear Finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be used both eccentrically and rotationally, leaving a crystal clear, hologram-free finish. Ideally, 3D 520 should be used after a HeavyCut or medium polish like the 3D ACA X-TRA 500 or a comparable polish. 3D ACA 520 becomes clear after a short working time, allowing for good visibility on the paint. 3D 520 is characterized by a very long working time and is user-friendly and economical due to the delayed breakdown of polishing particles into small particles. Very Easy Application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and free from fillers. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and can be easily wiped off. It is recommended to use 3D sparingly to avoid any excess. We recommend using 3D with softer finishing foam pads.

Content: 0.059 Liter (€42.37* / 1 Liter)

€2.50*

Details

Variants!

3D ACA X-TRA 520 Gloss Polish Finish Fine 59ml

3D Products

3D ACA X-TRA 520 Gloss Polish Finish Fine 59ml

3D ACA X-TRA 520 is an innovative polish for fine polishing and finishing applications. Known as 3D 520, this polish is produced by 3D Products in the USA. With 3D 520, paint defects can be corrected after HeavyCut polishing processes in a very short time to achieve a high-gloss finish. 3D 520 is water-based and contains "Alpha Ceramic Alumina" polishing particles, allowing for a significantly longer work time. It is suitable for both soft single-layer paints and hard clearcoats. 3D 520 is free from fillers and can be completely removed even with mild paint degreasers. Hologram-free, crystal-clear finish with 3D ACA X-TRA 520 High Gloss Polish 3D 520 can be used both with rotary and eccentric polishers and leaves a crystal-clear, hologram-free finish. Ideally, 3D 520 is used after a HeavyCut or medium polish like the 3D ACA X-TRA 500 or a comparable polish. 3D ACA 520 becomes clear after a short processing time, thus allowing good visibility on the paint. 3D 520 is characterized by a very long work time and is easy to handle due to the very late breaking down of the polishing particles into small particles. Very simple application: 3D ACA X-TRA 520 3D 520 is water-based, solvent-free, kerosene-free, and filler-free. Despite its environmentally friendly and user-friendly formulation, 3D 520 does not create dust and can be easily wiped away. It is recommended to use 3D 520 sparingly to avoid any excess. We recommend using it with softer finishing foam pads.

Content: 0.059 Liter (€66.10* / 1 Liter)

€3.90*

Details

3D BDX Brake Dust Remover – Effective Rim and Rust Remover 473ml

3D Products

3D BDX Brake Dust Remover – Effective Rim and Rust Remover 473ml

The 3D BDX Brake Dust Remover is a mildly alkaline brake cleaner and rust remover. 3D Car Care sets a benchmark with this formulation for the quick removal of rust particles based on our testing. Even without brushes, BDX cleans deep-seated brake dust extremely fast and reliably, turning dissolved iron particles red. This is achieved through a complex yet effective formula. 3D BDX Brake Dust Remover can be used as a pre-cleaner for the entire body and rims. Rust remover and rim cleaner pH value 8 (slightly alkaline) Highly effective dirt removal Suitable for the entire body

Content: 0.473 Liter (€34.88* / 1 Liter)

€16.50*

Variants!

3D Bead it Up Spray Sealant 3780ml

3D Products

3D Bead it Up Spray Sealant 3780ml

3D Bead it Up can be used as a spray sealant on dry or freshly washed wet vehicles. It creates a water-repellent protective layer with an ultra-smooth feel. The versatility on nearly all exterior surfaces sets Bead it Up apart. Bead it Up can be used on paint, glass, chrome, aluminum, plastic, and wheels. It enhances the hydrophobic properties of ceramic coatings and provides a very high gloss finish on rough and silky surfaces. 3D Bead it Up: Ultra-Smooth Spray Sealant for Almost All Surfaces 3D Bead it Up is very easy to apply by spraying and buffing. It can be used as a standalone protection product or as a topper for waxes, sealants, or ceramic coatings.

Content: 3.78 Liter (€10.03* / 1 Liter)

€37.90*

Variants!

3D Bead it Up Spray Sealant 473ml

3D Products

3D Bead it Up Spray Sealant 473ml

3D Bead it Up can be used as a spray sealant on dry or freshly washed wet vehicles. It creates a water-repellent protective layer with an ultra-smooth feel. Its universal applicability on almost all exterior surfaces is what makes Bead it Up stand out. It can be used on paint, glass, chrome, aluminum, plastic, and wheels. Bead it Up enhances the hydrophobic properties of ceramic coatings, delivering a very high gloss finish on rough and silky textures. 3D Bead it Up: Ultra-Smooth Spray Sealant for Almost All Surfaces 3D Bead it Up is very easy to apply by spraying and buffing. It can be used both as a standalone protective product or as a topper for waxes, sealants, or ceramic coatings.

Content: 0.473 Liter (€34.88* / 1 Liter)

€16.50*

3D Eraser Water Spot Remover Gel 473ml

3D Products

3D Eraser Water Spot Remover Gel 473ml

3D Water Spot Remover Gel is a highly effective gel designed to eliminate water spots and limescale. This product effortlessly and reliably dissolves deep-seated mineral deposits from paint, glass, and metal surfaces. Ideally, the Eraser Gel should be used before applying glass polish or sealing products. Please note: This product is restricted for commercial use and cannot be sold to private customers! Gel format for removing limescale Suitable for glass, paint, metal Perfect for pre-treatment before polishing or sealing

Content: 0.473 Liter (€39.96* / 1 Liter)

€18.90*

Details

Variants!

3D Final Touch Detailer Quick Cleaner 3780ml

3D Products

3D Final Touch Detailer Quick Cleaner 3780ml

3D Final Touch is one of the most popular products from 3D CarCare. It's easy to use and provides a seamless finishing touch after cleaning in the wash bay or for removing light dirt. At a budget-friendly price of under €10 for the classic pint bottle, 3D Final Touch is among the cheapest detailers on the market. However, do not underestimate this product! It delivers an ultra-smooth feel, effectively removes dirt, does not streak, and dries without residues. 3D Final Touch can be applied to all surfaces in the vehicle's interior and exterior. Effortlessly effective detailer for the final finish Suitable for all surfaces of the exterior and interior Dries streak-free and without smudges VOC compliant

Content: 3.78 Liter (€8.86* / 1 Liter)

€33.50*

Variants!

3D Final Touch Detailer Quick Cleaner 473ml

3D Products

3D Final Touch Detailer Quick Cleaner 473ml

3D Final Touch is one of the most popular products from 3D CarCare. It's easy to use and provides a quick finishing touch after washing or for removing light dirt. With a price under 10 EURO for the classic pint bottle, 3D Final Touch is one of the most affordable detailers on the market. However, don’t underestimate this product. It delivers an ultra-smooth feel, reliably removes dirt without streaking, and dries without residues. 3D Final Touch can be used on all surfaces inside and outside the vehicle. Easy-to-use detailer for the final finish Suitable for all exterior and interior surfaces Dries streak-free and residue-free VOC compliant

Content: 0.473 Liter (€24.31* / 1 Liter)

€11.50*

3D Glass Polish 521 Ceroxide Glass Polish 473ml

3D Products

3D Glass Polish 521 Ceroxide Glass Polish 473ml

3D Glass Polish is an innovative polish based on ceroxide for real glass. With 3D Glass Polish, light to deeper scratches on real glass surfaces can be removed, including streaks from windshield wipers and baked-in water spots. Thanks to the high proportion of the decisive abrasive medium ceroxide, the polish is easy to apply and delivers impressive results in no time. 3D Glass Polish for Windshields and All Other Real Glass Surfaces 3D Glass Polish can be worked for a long time and still wiped off easily. For best results, we recommend using felt pads like the Lake Country Rayon Glass Polishing Pads. Work should be done while monitoring the temperature, and water can be sprayed onto the glass for cooling.

Nur Gewerbe!

Nur für Gewerbekunden bestellbar.

3D GLW Ceramic Glass Cleaner + Sealant SIO2 473ml

3D Products

3D GLW Ceramic Glass Cleaner + Sealant SIO2 473ml

3D GLW Ceramic Glass Cleaner is an innovative glass cleaner from 3D Car Care, part of the GLW Series. The GLW Ceramic Glass Cleaner penetrates deep into the glass, leaving a crystal-clear finish paired with a hydrophobic and ultra-smooth protective barrier. Water droplets bead up and swiftly roll off the surface, especially during driving. It can be applied to both exterior surfaces and the vehicle interior, effectively preventing fogging of windows and keeping them clean. For crystal-clear glass surfaces Water-repellent action and cleaning in one step Applicable inside and outside Prevents fogging and re-soiling

Content: 0.473 Liter (€32.77* / 1 Liter)

€15.50*

Class-A Polishes Perfect for Subsequent Coatings: 3D One Hybrid, 3D ACA X-TRA 500, 3D ACA X-TRA 520

We start our collaboration with 3D Products with the polishes 3D One Hybrid, 3D ACA 500 and 520. The 3D One Hybrid is a water-based polish that is controlled by the polishing pad and can be used for medium cut to high-end gloss. The oilier polish 500 is a heavy cut polish characterized by an extremely long processing time, while the 520 polish is a finishing polish also with a very long processing time. All three polishes can be used rotatively, eccentrically, and forced eccentrically, and are free of fillers. They are ideally suited for gloss defect correction for subsequent long-term sealing with ceramic high-end coatings from Gtechniq, CarPro, or Gyeon.

Filter products

Class-A Polishes Perfect for Subsequent Coatings: 3D One Hybrid, 3D ACA X-TRA 500, 3D ACA X-TRA 520