Mini Polishers: Precision for Tight Spots and Small Areas

FLEX PXE 80: The Ultimate Mini Polisher Ideal for rotary and eccentric tasks with 3 and 12 mm stroke Flexible and easy operation from surface prep to hologram-free finishing in one tool The perfect add-on for every detailer, painter, and spot repair specialist Throttle switch for a smooth and gentle start, with a lock for continuous operation Equipped with RPM constant speed control and 4 speed settings, easily visible through LEDs Perfect ergonomics and flexible grip options with optimally placed SoftGrip surfaces High running smoothness due to vibration optimization Damped special hook-and-loop pads for polishing and sanding Protective rubber ring to safeguard surfaces Brushless motor for higher efficiency and longer lifespan Electronic Management System (EMS) protects the tool, extends its life, and increases efficiency LED battery capacity indicator FLEX battery system: Compatible with all 10.8 V battery packs Technical Data Max. Polishing Pad Diameter: 80mm Max. Backing Pad Diameter: 75 mm Stroke: 3 + 12 mm No Load Speed: 400-2000/-3000/-4000/-5000 RPM No Load Stroke Rate: 800-4000/-6000/-8000/-11600 RPM Battery Voltage: 10.8V Battery Capacity: 2.5 / 4.0 / 6.0 AH Various Flex PXE 80 models available at Chemical-Shark.de Tool only, without accessories 1 Flex PXE 80 mini polisher without batteries and power supply

Flex PXE 80 Set with AccessoriesFlex PXE 80 is the innovative mini polisher from the German manufacturer FLEX Tools. The PXE 80 can be used for polishing and sanding in both rotary and eccentric modes. The quick-change system allows for fast switching between drive types and backing pads.Specially designed for the PXE 80, polishing pads made of microfiber and foam from the Detail Passion Pad factory are available. These are listed in the "Accessories" tab below. For use with this high-performance polisher, we offer polishes from manufacturers like Meguiars, 3D Products, Sonax, Rupes, and Menzerna. We are happy to provide detailed advice.FLEX PXE 80: The Perfect Mini PolisherFor rotary and eccentric free-running work with 3 and 12 mm strokeFlexible and easy like never before from floral grind to hologram-free finishing with one toolThe ideal supplementary tool for any vehicle detailer, painter, and spot repair areaThrottle switch for a slow and sensitive start and lock for continuous operationEquipped with speed constant control and 4 speed settings, visible via LEDsPerfect ergonomics and flexible grip options with optimally placed SoftGrip surfacesHigh running smoothness through vibration optimizationDamped special hook-and-loop pads for polishing and sandingWith a protective ring to safeguard surfacesBrushless motor with higher efficiency and longer lifespanElectronic Management System (EMS) protects the machine, extends its lifespan, and increases efficiencyLED battery capacity displayFLEX battery system: Operates with all 10.8 V battery packsTechnical DataMax. Polishing pad diameter: 80mmMax. Backing pad diameter: 75 mmStroke: 3 + 12 mmNo-load speed: 400-2000/-3000/-4000/-5000 rpmNo-load stroke count: 800-4000/-6000/-8000/-11600 H/minBattery voltage: 10.8VBattery capacity: 2.5 / 4.0 / 6.0 AHDifferent Versions of Flex PXE 80 Available at Chemical-Shark.deMachine only without accessories1 Flex PXE 80 Mini Polisher without batteries and power supplyComplete set with accessories, charger, case, batteries1 Flex PXE 80 Mini Polisher without batteries and power supply1 Rotary adapter DT-P1 Eccentric adapter 3 mm stroke DT-XF31 Eccentric adapter 12 mm stroke DT-XF121 Adhesive pad 30 Ø BP-M/SR D30 PXE1 Hook-and-loop pad 30 Ø BP-M D30 PXE1 Hook-and-loop pad 75 Ø BP-M D75 PXE2 Batteries 2.5 Ah AP 10.8/2.51 Charger CA 10.8/18.01 Transport case L-BOXX® 1361 Case insert

Flex XFE 7-12 Random Orbital Polisher 80 75mm - Perfect for small areas VR Microprocessor Electronics: features constant speed control via tachogenerator, soft start, restart protection after power failure, overload protection, temperature monitoring, and speed preselection Free-running drive for hologram-free finishing 12 mm polishing stroke for high efficiency Damped special hook-and-loop pad for polishing High smoothness due to balancing mass Optimized airflow for the best cooling effect of motor and gear. No disturbing exhaust for the user Flat gear head reduces distance to the surface, allowing safe handling in any position Ergonomically shaped handle with soft grip for precise control and comfortable handling Rubberized resting surface for secure placement Ideal for temperature-sensitive paints due to low heat generation on the surface Perfect for spot repair and complex shapes. A great complement to larger polishers Free-running Random Orbital Suitable for all user types Easy handling No hologram formation Low material removal Optimal for finishing Technical Data: Max polishing pad diameter 80 mm Max backing pad diameter 75 mm Stroke 12 mm No-load speed 1800-5500 /min No-load stroke rate 3600-10800 /min Input power 700 watts Output power 420 watts Dimensions (L x H) 320 x 120 mm Cable length 4.0 m Weight 2.1 kg Contents: Flex XFE 7-12 Random Orbital Polisher 80 75mm

The LHR75E mini random orbital polisher features a 75mm backing pad and a powerful 12mm stroke, making it perfect for tight spots. The high-performance motor delivers impressive torque. Its unique design and ergonomic power switch ensure safe and comfortable handling for optimal operation. The device includes an Allen key for quick service access. The rotating silencer keeps noise levels low while maintaining maximum performance. The specially perforated backing pad ensures effective heat dissipation and cooling. The front housing is covered with soft padding for better handling. The LHR75E’s handle made of transparent shockproof polycarbonate is fully insulated from airflow to prevent draft cooling. Technical Specifications Backing pad diameter: 75mm Stroke: 12mm Power: 400 Watts R.P.M.: 4000 - 5500 Weight: 2.3kg Thread regulation Spindle thread: M6-F Power cord: 9m

The Rupes iBrid nano has long been regarded as one of the most advanced battery-powered polishers. Now, Rupes introduces the HLR75, a new mini polisher based on iBrid technology. The BigFoot HLR75 is a mini polisher with 18V technology, offering previously unmatched performance in this segment. With a 12mm free-spinning eccentric stroke, this 75mm battery polisher is quickly gaining fans, not least due to its unusual yet perfected ergonomic design. The New 75mm Battery Mini Polisher: Rupes iBrid HLR75 18V Stroke: 12mm Battery: 18V - 2.5Ah RPM: 3000-5500 Battery operation with one battery: 35-45 Min Electronic speed control Overload protection Controlled start LED battery indicator Dimensions: 240 x 144 x 80mm (without battery) Weight: 1.1 kg (without battery) Preorder the New Rupes HLR75 18V at Chemical-Shark.de We recommend using high-performance polishing pads like Rupes, Detail Passion, and Lake Country with the HLR75. The HLR75 can be preordered and is available in two sets with accessories. Delivery will occur right after arrival at our warehouse. Of course, the machine is also on display in our store and will be thoroughly introduced on our YouTube channel "Chemical-Shark". Rupes HLR75 STB Set - Components 1 x Mini iBrid 9.HLR75 1 x Charger 9HC180LT 2 x Battery 18V / 2.5Ah 9HB180LT

The EX603 is an interesting 75mm backing plate polisher crafted by the Asian manufacturer ShineMate. The upgraded version features many new materials and technology. It's equipped with a highly vibration-reduced 500W motor, designed for maximum performance and user-friendliness. The EX603 is not only an affordable 75mm polisher but also stands out with extreme durability and high performance. The 75mm polisher's backing plate size and orbital stroke are ideal for current body designs. With the EX603 orbital polisher, both enthusiasts and commercial professionals can achieve their standards at a very attractive price. Top-Level Paint Correction for Classic Cars, Youngtimers, and Current Designs: The ShineMate EX603 With a 12mm stroke, high stability, and ergonomic design, the EX603 is perfectly suited for preparing all types of vehicles. At only 1.9kg, the 12mm EX603 is lightweight and compact. The polisher boasts 2,500 to 5,500 orbital rotations per minute. A sophisticated cooling system ensures that a low heat operation is possible at this power level. The supplied cable length is 5m. Perfect Ergonomics for Polishing Pleasure The housing of the EX603 orbital polisher is made of high-quality plastic with a rubberized soft grip for secure handling in both the grip and guide areas. All materials are designed for maximum stress. The infinitely adjustable control lever allows for power settings across 6 levels, from distributing polish to refining cuts. Operation starts with a smooth activation switch. A locking mechanism is included to maintain operation. The backing plate features a sophisticated cooling system and simultaneously expels any polish dust that may arise. The eccentric weight is precision-engineered from high-strength metal using CNC technology. EX603 Orbital Polisher 75mm with 12mm Stroke Freely rotating 12mm eccentric polisher EX603 with 75mm backing plate 5m cable 75mm backing plate Hex tool for changing the backing plate Medium cut foam polishing pad Finishing foam polishing pad German user manual

ShineMate EB210 – The Ultimate Battery Mini Polisher & Spot Sander The ShineMate EB210 is a powerful battery mini polisher featuring an innovative quick change system, capable of functioning as both a random orbital sander and a polisher. With its compact design and strong performance, it enables precise work in hard-to-reach areas – perfect for smart repairs, paint corrections, and spot polishing. Main Features of the ShineMate EB210: Versatile Usage: Polishing & sanding with rotary and eccentric motions Compact Design: Ideal for working in tight and difficult spaces Innovative Quick Change System: Fast switching between rotary and eccentric polishing High-Performance Battery: Cordless operation with a 10.8V battery for maximum flexibility High-Quality Complete Set: Includes extensive accessories for professional use Precise Speed Control: Orbital Rotations: 3,000–8,000 RPM Rotary Rotations: 700–8,000 RPM Technical Specifications: Model: EB210 Battery Voltage: 10.8V DC Max. Backing Pad Size: 75 mm Speed Range: Orbital Rotations: 3,000–8,000/min Rotary Rotations: 700–8,000 RPM Warranty: 2 years on battery and machine Contents of the ShineMate EB210 Set: ShineMate EB210 Mini Polisher 10.8V Charger 2x 10.8V 2.5Ah Batteries Rotary Backing Pads: 31mm, 48mm, 65mm Eccentric Backing Pads: 31mm, 48mm, 65mm Mounting Accessories and Tools for the Quick Change System 10 Foam Polishing Heads 3 Microfiber Polishing Pads Medium Cut 3 Microfiber Polishing Pads Heavy Cut 3 Foam Polishing Pads Heavy Cut 3 Foam Polishing Pads Medium Cut 3 Foam Polishing Pads Finish High-Quality Transport Case Recommended Accessory Extensions: The manufacturer recommends using the 65mm backing pad in eccentric mode when using 75mm polishing pads. Alternatively, the optional 74mm backing pad can also be used. The ShineMate EB210 is the perfect choice for professionals and enthusiasts who need a powerful, cordless mini polisher with the highest precision and flexibility.