Wheel Coatings – Long-lasting Protection for Your Wheels

Gtechniq + EZ Detail Coat & Clean Kit Wheel Protection & Brush Gtechniq Wheel Armour C5 is a silicone-based ceramic coating for automotive wheels. Wheel Armour C5 has been developed by Gtechniq with a strong focus on brake dust resistance and other contaminants on wheels. Wheel Armour is suitable for all types of coated wheels. On the surface, a microstructure forms that provides high resistance to stains and environmental influences. Thanks to the chemical bond of the silicone formula with the wheel surface, Wheel Armour is extremely durable. With Wheel Armour C5, you protect your wheels and make cleaning easier. Aggressive wheel cleaners are no longer needed; typically, wheels can be cleaned with a mild foam cleaner (SnowFoam) and a pressure washer. Ceramic protection for coated wheels, brake calipers, and exhaust tips High dirt resistance and easy cleaning Durability of up to 2 years Consumption advice: The following notes are a guideline. Generally, 30ml is enough for at least 2 large sets of tires with appropriate practice! 15 ml of Wheel Armour C5 is sufficient for the front surface of one set of 17-inch wheels. 30 ml of Wheel Armour C5 is enough for the front and inner surfaces of one set of 20-inch wheels. EZ Detail Brushes are arguably the best nylon wheel brushes for cleaning wheels. The patented special nylon, known as Nylex, provides extremely soft bristles. Scratches are excluded with proper use. The brush has been exclusively manufactured in the USA for many years, superior in quality and safety compared to wheel brushes from the Far East. If you're looking for the best wheel brush with bristles for car care, we recommend the original from EZ Detail. EZ Detail Wheel Brushes: Thoughtful Quality for Wheel Cleaning EZ Detail Speed Master Wheel Brush is available in two lengths and in red and blue: 33 cm and 45 cm. It is a highly developed wheel cleaning brush that safely removes brake dust and general road grime from wheels. For particularly gentle cleaning, the bristles at the end are split in a sophisticated process, the handle is bendable and coated with a protective plastic sheath. Even against strong wheel cleaners, the Daytona Speed Master Wheel Brush is chemically resistant, allowing it to free your wheels from harmful brake dust for many years. Especially for road contaminants like oil, tar, or other sticky substances, a bristle brush is preferred over a microfiber brush. This is especially true for off-road vehicles and SUVs due to its design. EZ Detail Speedmaster Brushes: The Original at Chemical-Shark.de Chemically resistant wheel brush Gentle bristles with split ends Coated handle for safe use Available in red or blue Overall length of the small variant: 33cm Length of brush head: 16.5cm Diameter of brush heads: 6cm

Gtechniq Wheel Armour C5 is a silicon-based ceramic coating designed for car wheels. Developed by Gtechniq with a focus on repelling brake dust and other contaminants on wheels, Wheel Armour is suitable for all types of coated rims. The surface forms a microstructure that provides exceptional resistance to stains and environmental factors. The chemical bond of the silicon formula with the wheel surface makes Wheel Armour extremely durable. With Wheel Armour C5, you protect your wheels and make cleaning easier. Aggressive wheel cleaners are no longer needed; usually, wheels can be cleaned with a mild foam cleaner (SnowFoam) and a pressure washer. Ceramic protection for coated wheels, brake calipers, and exhaust tips High dirt repellency and easy cleaning Longevity of up to 2 years Consumption note: The following indications are an approximate guide. Generally, 30ml is sufficient for at least 2 large sets of tires with some practice! 15ml of Wheel Armour C5 is enough for the front surface of one set of 17-inch wheels. 30ml of Wheel Armour C5 is enough for the front and inner surfaces of one set of 20-inch wheels.

Wheels and tires are exposed to extreme dirt due to their proximity to the road and brakes. Additionally, cleaning wheels can be challenging because the wheel bed is hard to reach and the front has small areas, spokes, and grooves. A durable, dirt-repellent non-stick coating is essential to keep wheels cleaner for longer and simplify the cleaning process. Gtechniq Wheel Coating Kit The Wheel Coating Kit from a leading manufacturer of protective coatings includes everything needed for wheel coating. Gtechniq Wheel Armour C5 is specifically designed for alloy wheels and brake calipers. It is an extremely durable ceramic coating that withstands temperatures up to 600 degrees Celsius. 250ml Panel Wipe Degreaser for cleaning 30ml C5 Wheel Armour 3 x MF1 ZeroR Microfibre Buff Cloth

Q2 Rim EVO is the updated wheel coating from Gyeon's best-selling range. It offers outstanding self-cleaning properties, meaning less time spent cleaning wheels and more time enjoying your ride. It protects against excessive brake dust accumulation and makes regular wheel washing easy with just clean water and some water pressure. For heavily soiled wheels, a pH-neutral wheel cleaner can be used to facilitate the cleaning process. EVO version with significantly increased durability of up to 36 months The classic among wheel coatings in the EVO version Heat resistant up to well over 800°C Prevents adherence of brake dust and road grime Suitable for wheels, engine parts, and exhaust Only 1 layer achieves the performance of the predecessor (with 2 layers) Q2 Rim EVO is not only heat resistant but also resistant to aggressive brake dust. Q2 Rim EVO is safe on all types of wheels, regardless of their finish: painted, powder-coated, anodized, high-gloss polished, or high-gloss compressed.